Easy ways to Save on your Energy Bills

Turn off unused lights - but don’t make this your only focus!
Switching off lights is an easy and obvious way to reduce energy usage. However, it can be something of a decoy. Whilst many of us focus so much on turning off unused lights, we fail to focus on the much bigger wins in your home. For example, a typical LED lightbulb might use around 7.5 watts of energy. In contrast a typical hairdryer or electric shower will use 2,000-3,000 watts (2-3kW) of energy. That means they consume around 250-400 times more electricity than the lightbulb! Whilst we should continue to switch off those lights, don’t forget the other things! Let's start therefore by looking at appliances in more detail.
Understand your Appliances and Gadgets Energy
Consumption is measured and charged on your bill in ‘Units’. One Unit of electricity equals 1 kilowatt hour (kWh), or 1 kilowatt of energy used consistently for 1 hour. An appliance rated at 1,000 watts (1kW) will use 1 Unit if switched on consistently for 1 hour. An appliance rated at 500 watts (0.5kW) will use 0.5 Units in 1 hour, and an appliance rated at 3,000 watts (3kW) will use 3 units in 1 hour. This assumes that the appliance’ full power rating is used for that full hour, which often isn’t the case. For example a washing machine will only require full power when the heating element is engaged to heat the water, but will use less during other points of the cycle. An iron is controlled by a thermostat so the heating element switches on an off to maintain the correct temperature. Knowing the approximate power rating of your appliances however is a useful way to gauge approximately how much energy they may be consuming and therefore to identify any easy wins in terms of energy and cost savings. The power rating will be stated in watts or kilowatts (kW) and this is usually printed on the appliance. 1,000 watts is equal to 1 kilowatt (kW).
We have provided an approximate guide below:-
- Hair dryer: 2,000-2,500 watts (2-2.5kW).
- Iron 2,000-3,000 watts (2-3kW)
- Oil filled electric heater: 600-3,500 watts (0.6-3.5kW)
- Electric fan heater: 2000 watts (2kW)
- Immersion heater: 3,000 watts (3kW)
- Washing Machine: xxx
- Vacuum cleaner: 650-900 watts (0.65-0.9 kW)
Top tips for saving when using appliances
- Watch out for those high energy appliances – generally this includes anything that generates heat, for example hair dryers, irons, electric heaters, emersion heaters and washing machines.
- Don’t leave devices on standby or chargers plugged in, or on standby, when not in use. Most homes have many gadgets and appliances including TV’s, free view/satellite TV boxes, laptops, microwaves, and mobile phone and laptop chargers. Whilst generally these don’t consume huge amounts of electricity, they do consistently draw power over long periods, which really adds up unless they are switched off or unplugged. Switching off these items therefore provides an easy win that makes little difference to you (save for a few seconds of effort which is well worth it).

Heating & Hot Water
- Turn down your thermostat - The commonly quoted guidance is to turn your thermostat down by 1 degree, from the level that you usually set it to. That’s a great approach and a simple method, estimated to save a typical household around 10-15% on their energy consumption and cost. That said, there is no ‘one size fits all’ approach - if you are elderly or have a health condition, reducing the temperature might not be an option. Conversely, some hardy souls might enjoy the challenge of seeing how much they can cut their consumption, whether that’s for the cost or environmental benefits. The point is that for most of us, a small reduction in temperature should be relatively imperceptible, yet will enable you to way to make some good savings.
- Minimise draughts/heat escape – It’s also key to consider where heat might be escaping from your home. The more heat that you can keep in, the lower your heating costs should be. Easy steps to take can include using of draught excluders around doors, keyhole draught excluders/covers, and checking for issues with windows and doors (are they properly closed? do they have vents that can be closed? Have seals decayed and can they be replaced?)
- Keep yourself warm rather than heating your entire home - This is particularly useful if there’s just one person in the house such as when working from home. Heating the entire house when only one room is occupied can be inefficient and costly. Simple steps to take might include wearing cosy clothes, using throws, blankets and/or a hot water bottle, or using local heating that just warms the specific room that you’re in. This could include using a lower powered electric heater such as a small thermostatically controlled 600-700 watt oil filled radiator to lift the room temperature. Be careful with this last point as a larger oil-filled radiator or fan heater will normally be 2,000-3,000 watt and could end up costing you more than using the central heating.
- Save when showering to reduce the amount of hot water that your boiler has to heat up – this can include taking shorter showers (try setting a target of 3 or 4 minutes), slightly reducing the temperature of the water, or turning the shower off whilst you lather your hair, etc. Given the amount of water that your shower can use in a relatively short time, these seemingly small changes can add up, particularly if there are several people in your household. The same goes for those relaxing baths which use much more water. We all need things to look forward, so why not save it for a once a week treat.

Save when Washing Up
Dishwasher vs handwashing the dishes?
A study by undertaken at the University of Bonn found that on average, households with a dishwasher used around 50% less water and 28% less energy per item cleaned. That said, there is substantial variance in efficiency of both methods, primarily depending on individual habits, e.g. whether or not the tap is left on throughout for rinsing throughout washing up, whether the dishwasher is fully or partially loaded, etc). This resulted in significant variance, but most notably the potential for huge increases in the amount of water and energy used during handwashing by the less diligent handwasher. Indeed a dishwasher used around 15 litres per load whereas handwashing generally used around 30 – 100 litres. In terms of energy consumption, dishwashers averaged around 1-2kWh (units energy) and handwashing was also higher at around 2.5kWh (units of energy), albeit this would vary more significantly depending on rinsing habits, say if hot water is left running throughout. In general therefore, unless you are incredibly careful with the amount of water used, the case for using the dishwasher is compelling, particularly when adding in the convenience factor. Irrespective of method chosen however, here are some key tips to ensure you don’t waste water and energy:-
Dishwasher
- Ensure that your dishwasher is fully loaded before running a cycle.
- Use Eco cycles – these generally heat the water to a lower temperature which reduces the amount of energy required.
- Before running your cycle, ensure that nothing is preventing the spray arms from rotating, which might mean having to dishwasher again for the same load.
Handwashing
- Don’t leave the tap running whilst scrubbing dishes – this is a needless waste of water and energy.
- Prepare – scrape plates well before washing and pre-soak in around 1-2 cm of cold water.
- After pre-soaking, start washing with just a small amount of hot water in the sink rather than filling it all the way. Start with less-soiled items and rinse those first items with the fresh water which will lowly fill the sink as you go.
- Once the sink is filled continue to wash the remaining dishes and rinse those with slow flow of cold wate (turning the tap on and off as required, rather than leaving it running).

Use less energy when Cooking
- When using the oven, always aim to cook more than one meal at once. Add some jacket potatoes or a casserole that will save you time and energy the following day.
- Leave the oven open after cooking to allow residual heat to escape and warm your home.
- Don’t over fill the kettle – more water means more energy required to boil it (and kettles use a lot of energy). A full kettle can take 2 or 3 times longer to boil than if it contains just enough water for 1-2 cups of coffee.

Share this Post
